Size: Base diamter is 55mm, overall length is 95mm
♥Feature:
Stainless steel material, rust resistant; With rubber bumper, offer a cushioning effect between the wall and the door, reduce impact force
on the wall, prevent door handle from hitting wall, and eliminates ugly scuff marks on door.
♥Package includes:
4 x Door stopper
12 x Screw
12 x Expansion bolts
♥Installation Steps
1. Punch free- 3M self-adhesive:
Strong adhesive 3M sticker to make sure convenient stuck firmly
Step 1. Clean wall dust and oil stains
Step 2. Tear off the adhesive protective film along the corners to ensure that no dust entering. (Tips: After tearing off the the film, use a
hair dryer for about 1 minute to make the 3M adhesive more sticky and firmly)
Step 3. Measure the place to install, and press hard for 5-7 seconds..
Step 4. Wait until the glue is completely adhered to the wall, then you can use the door stopper well.
2. Drilling:
With mounting screws and anchors for easy installation, you can choose to install on the wall, door or baseboard.
Step 1. Measure position of putting door stopper
Step 2. Drill 3 hole on the wall with electric drill
Step 3. Use a hammer to install the expansion bolts into the hole
Step 4. Put the screws into the holes of the door stop, rotate and tighten the door stopper into the anchor bolts.